I was able to finish up most of the ceiling, and I put down self-leveling concrete in the shower pan. However, self-leveling is a bit of a misnomer. It looks really smooth and level, but it isn't 100% level there is probably at leave a 1/4 to 1/2 difference in some places...
I put some glue on the fins of the shower pan, but it didn't fix it entirely and the pan will squeak a bit here and there. I may try to spray some foam under it, but it will probably not work well, since there are fins in the way... If I could start over I would put down a bed of mortar, or make sure it was really level.
No comments:
Post a Comment